News and blog

Going Green With Domes

Are open bulk storage yards a thing of the past? With an increasing need for environmental compliance, uncovered stockpiles need to be enclosed sooner rather than later. It's no surprise that mines, ports, power and cement plants seek a storage solution that avoids downtime and high cost. Yet many face additional hurdles, such as:

  • Location is remote and rugged with a sloping terrain
  • Climate is adverse with a weather window
  • Stockpile is an irregular shape
  • Site is in a confined area
Manuel Gómez-Morin Cultural Center in Mexico

In Chile, a second Freedome will soon be covering another coal stockpile


All Purpose, All Terrain

It takes more than conventional building construction to overcome all obstacles. Traditional building solutions with joists, for example, are limited to planar trusses in an array and work in only one direction on level ground. Solutions with machined joints, such as ball-joint systems, are expensive and must minimize the number of nodes. 

Geometrica solves all of these issues with a freestyle, geodesic dome that can enclose irregularly-shaped stockpiles on any terrain.  In fact, our solution is even trademarked -  Freedome®. This incredibly strong superstructure can span 300m without any interior columns.  Constraints from conventional building methods are released.  


Manuel Gómez-Morin Cultural Center in Mexico

This Freedome spans over 200m - without any indoor columns

Geometrica Freedomes accommodate:

  • Brutal locations with sloping terrain  
  • Hurricane-force winds and rain 
  • Punishing snow loads 
  • Corrosive marine environments 
  • Caustic bulk materials 
  • Irregularly-shaped, confined storage yards

Custom Design

Geometrica's technology evolved from gridshell innovations originally developed by our forefathers in the 1960s — today, our domes can be designed with a non-circular plan in varying curvatures for complete design freedom. This unmatched expertise, refined and updated, now covers some of the world’s largest stockpiles.

There is literally an infinite number of possible design plans for a Freedome structure.  For instance, just like our circular domes, Freedomes may have lamella, keiwitt or combination patterns with a single or double structural layer.  Once the geometry and support requirements are defined, Geometrica’s engineers can propose the most efficient patterns and layer options for an enclosure.

Whether rock fill, sand, clay, gravel, bauxite, coal or mineral ore, all of Geometrica’s designs can accommodate existing operations seamlessly. Clearances needed for vehicles or equipment, personnel access, and maintenance requirements are readily accommodated during our design work.

Environmental Footprint

Planet-friendly Freedomes have transformed bulk materials handling in rainforests, ports, coastal strips, gravel plains, sandy deserts, high dunes, mountains and salt flats. These clear span superstructures make full use of space and protect bulk materials from the elements — and the surrounding environment from the stockpiles — helping industry secure a smaller environmental footprint.  Extra operational efficiencies and benefits include:

  • Fugitive dust, runoff and noise 
  • Translucent paneling provides natural interior light
  • Structure components are packed into recyclable, metal containers
  • No special equipment is required on site
  • Locally-sourced labor installs our structures
Manuel Gómez-Morin Cultural Center in Mexico Manuel Gómez-Morin Cultural Center in Mexico

Installation begins in Nigeria with locally-sourced manpower

The "lift-in-place" assembly method is used for domes and vaults

Zero Downtime

Excellent strength-to-weight ratios make Geometrica’s domes the go-to solution for storing bulk materials, especially in the most challenging locales worldwide.  And, we understand that many stockpiles must remain in operation while being covered too.  

Manuel Gómez-Morin Cultural Center in Mexico

This stockpile did not stop operations during Freedome installation

Geometrica offers three different assembly methods - lift-in-place; perimeter self-supporting; and center-out.  The option ultimately utilized is determined by the specific site requirements, operational requirements, as well as the structure’s design.  

Stockpiles can remain in operation while being covered and it can be accomplished safely, rapidly and economically without heavy machinery, scaffolding or welding. Reduced time, labor and equipment also equates to a lower total cost of installation.

Hundreds of uncovered stockpiles still exist worldwide and can benefit from Freedome technology. Regardless of geography or climate, Geometrica designs domes that deliver both business- and eco-friendly solutions.  We believe that industry and nature can coexist on some of the largest scales imaginable. 

Our mission is to provide customized storage solutions to industries around the world.  The question is: “What can Geometrica do for you?”  To learn more, please complete our inquiry form and let’s get started.

Manuel Gómez-Morin Cultural Center in Mexico

High winds, punishing snow loads, and torturous slopes at 4000m above sea level in the Chilean Andes